Format Motion Linear

This command can be added by right-clicking on the Linear Motion. heading inside “Commands” tab.

It is used to print the cutting movements (G1 movements) in the appropriate format in the NC program.

Linear motion lines, which are expressed with GOTO lines in the APT/CL file, first activate “Event Linear/Rapid Motion” in MANUSpost.

This event includes “ActionLinearMotion” as standard.

“ActionLinearMotion” runs Format Motion Linear., Format Motion Rapid. or other similar commands defined under the Linear Motion. group, depending on whether the motion is rapid (G0) or cutting (G1) motion.