Format Motion Linear
=============================================


This command can be added by right-clicking on the :ref:`Linear Motion<Event Linear/Rapid Motion / ActionLinearMotion>`. heading inside "Commands" tab.

It is used to print the cutting movements (G1 movements) in the appropriate format in the NC program.

Linear motion lines, which are expressed with GOTO lines in the APT/CL file, first activate "Event Linear/Rapid Motion" in MANUSpost.

This event includes “ActionLinearMotion” as standard.

“ActionLinearMotion” runs :ref:`Format Motion Linear<Format Motion Linear>`., :ref:`Format Motion Rapid<Format Motion Rapid>`. or other similar commands defined under the :ref:`Linear Motion<Event Linear/Rapid Motion / ActionLinearMotion>`. group, depending on whether the motion is rapid (G0) or cutting (G1) motion.